Shop floor equipment

The assembly table for vent fittings is a versatile
swivel/tilt table suitable for a wide range of jobs when assembling vents and small frames. The size of the work surface can be adjusted using extensions and swivel arms.

Technical Data:

Setting up several tables for facade profiles in a line provides an ideal environment for assembling large units. The tables can be moved easily into position on rails. They can also be moved to one side when not required.

Technical Data:

The swivel table can be used for working on vents and smaller frames. The units can be rotated vertically.

Technical Data:

The door profile assembly bench provides an effective facility for assembling fittings on door profiles. The assembly bench has storage space for fittings so that the employee always has the necessary accessories to hand. When assembling the fittings, the profile is clamped and can be rotated 90° forwards and backwards (in 15° increments). Plans or diagrams can be hung at eye level.

Technical Data:

The lifting aid lifts and transports profiles from a stillage to a machine, e.g.

• Foiling machine
• Isomat
• Double-headed mitre saw
• Processing centre
• Gasket inserting machine
• Loading magazine
• or when picking profiles from one stillage to anothe

• Prospect Lifting aid (pdf, 2.8 MB)

For easy access to small tools that require electricity or compressed air.

• Swivel arm with device holders
• Device holder with 4 compressed air and 4 electrical connectionspoints
• Tool storage facility 700 x 240 mm
• Line provided for use compressed air device
• Swivel arm can be wall-mounted

Technical Data:

The profile taping machine can be used to apply a protective tape on all profiles with two parallel surfaces. It is also possible to apply the tape on a third side, at a right angle to the other two sides, in a single operation.

Technical Data:

Stillage carrier for transporting Schüco stillages.

• For profile palettes up​ 760​ mm ​wide
• Robust welded steel design
• Can be moved on ​4 ​polyamide-castors, ​Ø ​175 mm,​ all​ 4​ with brake facility

Technical Data:

Long profile carrier for horizontal transport or storage of uncut profiles or mullion profiles from the facade.

• Profile carrier can be loaded on both sides
• 8 rack arms both left and right
• Depth ​475​ mm
• Rack arms welded securely on to uprights
• Middle uprights adjustable
• Can be moved on 4 ​polyamide-castors, ​Ø ​175 ​mm,​ ​2 with brake facility

Technical Data:

For horizontal storage and transport of long profile sections.

• Profile carrier can be loaded on both sides
• 7 ​pairs of rack arms per upright, adjustable to any length, allow variable distance between rack arms
• Soft rubber coating on rack arms
• 2​ middle uprights adjustable
• Depth of rack arms 400 mm each side
• Can be moved on​ 4​ polyamide-castors,​ Ø​ 150​ mm,​ ​2​ with brake facility

Technical Data:

For horizontal storage and transport of short and medium-length profile sections.

• profile carrier can be loaded on one side
• 12​ sections
• Adjustable section width, max. 90​ mm
• Compartment depth ​400 ​mm
• Section dividers and surfaces with PVC-U coating
• Side transport handles
• Can be moved on ​4​ polyamide-castors,​ Ø​ 150​ mm,​ 2 with brake facility

Technical Data:

The platform profile carrier is a universal trolley for stacking small parts and profile sections for transportation.

• Profile carrier can be loaded in a number of ways
• 27 mm ​thick flat board base
• 800 mm steel tubes on all 4 corners for mounting tube stumps
• 4 Profile attachment options on one side of steel tube
• Can be moved on ​4​ polyamide-castors,​ Ø​ 175 ​mm,​ all​ 4​ with brake facility

Technical Data:

The glazing bead carrier is designed for vertical transport of glazing beads.

• Transport carrier for glazing beads and supplementary profiles
• Storage section 1400 mm high
• 4 sorting sections with fixed divisions
• 30 compartments, 15 on each side
• Compartment depth 100 mm
• Compartment height 65 mm
• Surface covered with felt
• Can be moved on 4 polyamide-castors, Ø 150 mm, 2 with brake facilit

Technical Data:

The vent frame carrier is designed for mobile frame storage. Felt pads ensure that frames can be inserted and removed without scratching.

• Trolley for transporting vent frames

• Machine parts and assembly areas are covered with felt to protect the profile surfaces

• Section height: 2300 mm

• Section width: 100 mm

• No. of sections: 16

• Can be moved on 4 polyamide-castors, Ø 150 mm, 2 with brake facility

Technical Data:

The outer frame carrier can be used for mobile temporary storage. Frames can be pushed in easily using the rollers. The frames are fixed into the carrier by means of a hand brake.

• Trolley for transporting outer frames

• Machine parts are covered with felt to protect the profile surfaces

• Height of rollers from the floor: 330 mm

• Compartment height: 2300 mm

• Compartment width: 100 mm
• Can be moved on 4 polyamide-castors, Ø 150 mm, 2 with brake facility

• Braking device for holding the units in place during transportation

Techncial Data:

The indoor materials carrier is designed for transportation within the workshop.To save space, the carriers can be pushed together when not in use.

• when empty, trolleys can be pushed together
• Working width 700 mm
• Storage height 1500 mm
• Storage and base sections covered with wear-resistant rubber profile that is resistant to water-soluble paint
• Can be moved on 4 polyamide-castors, Ø 150 mm, 2 with brake facility

Technical Data:

The outdoor materials carrier is designed for transportation within the workshop and transportation to site. The carrier can be transported using forklift trucks or cranes and its removable wheels allow it to be loaded securely onto the lorry.

• Machine parts and assembly area covered with wear-resistant rubber profile that is resistant to water-soluble paint

• Can be moved on 4 polyamide castors, Ø 175 mm, 2 with brake facility

Technical Data:

To take Schüco gasket spools.

• To carry 4 spools
• Angle brake for each spool
• Spool racks moveable in all directions and have locking brakes

Technical Data:

Trolleys for preparing hand tools for metal fabricators with special insert for Schüco tools.
Optional: 8 different tool modules.

• Large polypropylene work surface with ergonomic handle
• 8 drawers (6 x 60 mm, 2 x 130 mm)
• Full extension drawers
• Drawer handle with integrated lock
• Central locking
• 2 castors and 2 fixed wheels (125 mm)
• Parking break

Technical Data:

For filling the compressed air sprayer (Art. No. 296 702) with compressed air.

• Fixed