Assembly

Corner crimping machines

Schüco Machine CC 400 M / CC 400 E

Efficient crimping of the four corner joints for windows, doors and façade units made from continuous, mitred aluminium profiles.
Barrier-free insertion of a fitted frame or loose profile bars.
The automatic, simultaneous crimping of 4 corners enables fast and secure processes for frame joints.
Horizontal fabrication of profile frame
The in-house Schüco clamping and crimping system distributes the cutting tolerances evenly across all 4 corners of a frame.

SCHÜCO CC 400 M

One fixed crimping head, two easy-to-position crimping heads on tracks and one freely moveable crimping head on a steel work bench
Calibration of 2 crimping heads with digital display
Flexible crimping head which can be positioned using two lasers
Rapid adjustment for different profiles by means of a crank and a hand wheel
Increased freedom as there are no stop blocks
Profile wall of 2 mm
Thicker wall on request
Minimum distance of 31 mm between top and bottom knife
Maximum distance of 166 mm (without conversion); 213 mm with change-over of the crimping knives

SCHÜCO CC 400 E

Electronic positioning of both linear heads
Electronic positioning of the top crimping knives
Increased freedom as there are no stop blocks
Profile wall of 2 mm
Thicker wall on request

Schüco Machine CC 120 A

Corner crimping machine with adhesive injections.
This machine combines 3 tasks:

Crimping the frame
Punching the adhesive
Measured adhesive injections

The manually adjustable mechanical controllers for milling tool and pump make operating the machine simple.

Schüco Machine CC 300

Corner crimping machine for extreme requirements:

Maximum crimping height: 300 mm
5 crimping levels
Minimal internal size of frame: 270 x 270 mm

These features ensure machining of both small and large frames.

Schüco Machine EVM S

For efficient crimping of corner cleats in windows and doors made from aluminium profiles.

PGA

Mitre sealing machine for applying the mitre sealing compound (Art. No. 298 864) to aluminium mitre surfaces.

Pneumatic Nail Gun

For driving the aluminium corner and T cleat nails into the clamped frames.

Hint

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

FROM THIS SECTION

Metal machinery

Prefabrication Saws Milling, Drilling, Punching Shop floor equipment