1. Gamintojams
  2. Metal Fabrication Machines
  3. Milling, Drilling, Punching

Milling, Drilling, Punching

End milling machines

End milling machine AKF 8

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

  • Milling area (Depth x Heigth) 100 x 180 mm.
Motor:
400 V / 2,2 kW
Material support shoulder:
90° to 20° (left) and 30° (right)
Module position:
90° and in 15- increments
Milling Ø (max.):
250 mm
Milling packages height (max.):
160 mm
Milling depth:
95 mm
Profile width (max.):
300 mm (at 90°)
Profile height (max.):
180 mm
Profile length (min.):
300 mm
Extraction branch Ø:
80 / 90 / 100 mm
Weight:
400 kg

End milling machine AKF 6

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

  • Milling area (Depth x Heigth) 85 x 150 mm.
Motor:
400 V / 3 kW
Material support shoulder:
+20° / 90°/ -20°
Module position:
90°
Milling Ø (max.):
250 mm
Milling packages height (max.):
90 mm
Milling depth:
85 mm
Profile width (max.):
305 mm
Profile height (max.):
150 mm
Profile length (min.):
400 mm
Extraction branch Ø:
80
Weight:
190 kg

End milling machine AKF 4

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

  • Milling area (Depth x Heigth) 80 x 140 mm.
Motor:
400 V / 2 kW
Material support shoulder:
+20° / 90°/ -20°
Module position:
90°
Milling Ø (max.):
250 mm
Milling packages height (max.):
90 mm
Milling depth(max.):
80 mm
Profile width (max.):
350 mm
Profile height (max.):
140 mm
Profile length (min.):
400 mm
Extraction branch Ø:
yes
Weight:
95 kg

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

Drilling machines

Drill and mill cutter BT 25 F

For all types of machining and drilling.

Motor:
400 V / 0,8/ 1,5 kW (change-pole motor)
Speed:
120 - 2160 min-1
Sleeve stroke:
100mm
Distance between spindle/table:
80 - 450 mm
Range of travel X-axis:
350 mm
Range of travel Y-axis:
160 mm
Spindle support:
MK 3
Weight:
340 kg

Door hinge drilling machine

For simultaneous drilling of fixing holes for 2-part and 3-part Schüco door hinges in the outer and vent frames.

Motor:
400 V / 1,1 kW
Speed:
2800min-1
Weight:
90 kg

Bench drilling machine BT 18

For setting drill holes.

Motor:
400 V / 0,7/ 1,3 kW (change-pole motor)
Speed:
240 - 3800 min-1
Drilling depth:
100mm
Distance between spindle/table:
150 - 450 mm
Distance between spindle/base plate:
560 mm
Spindle support:
MK 2
Weight:
85 kg

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

Copy routers

Copy router KF 348 and KF 347

For precise machining of the recesses for locks, including cylinder locks, and handles with gearboxes ­on door and window profiles.

  • KF 348: Aluminium and steel processing
  • KF 347: Aluminium processing
Motor:
400 V / 1,5 kW (change-pole motor)
Profile rotation:
180°
Working position:
0°, 60°, 90°, 180°
Profile width (max.):
120 mm
Profile height (max.):
100 mm
Profile length (min.):
500 mm
Profile length (max.):
3000 mm
Weight:
300 kg

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

Presses

Hydraulic press

Designed for the Schüco compact tools and the new generation of press tools. The hydraulic press works more quickly and with greater power than the base press.

  • Lifting height: 20mm
  • Minimum space required
  • compact design operated by foot pedal
  • fixing options
  • unrestricted tool height
  • Adapter for the next generation of press tools
  • Integrated machine base

Basepress

Designed for the new compact tool and the new generation of press tools

  • Lifting height: 20 mm
  • Fixing options for length stops and brackets
  • rapid tool change using fast fit systems (tool is ready to use immediately once fitted onto the base press)
  • Compact tool are held on the base press using a friction bearing and alignment pins
  • Unrestricted tool height
  • Safety switch for tool assembly
  • Adapter for the next generation of press tools
  • Increased user protection
  • Installation on machine base, Art.-Nr. 299 504 possible

Compact tools

Can be used for different series

  • excellent cost-performance ratio
  • logical sequence of steps in one punching operation
  • several preparation steps integrated into one combination press
  • Easy handling using handles
  • Multi-functionality means no need to change tools constantly
  • can be used for all series

Hydropneumatic hand press

Designed to accommodate Schüco tool insert.

  • Minimum construction means it is a very economical system
  • handle to operate with punch
  • Rapid tool changing
  • Security pins between press and tool
  • improved work protection

Pneumatic press

For streamlined production using Schüco press tools.

  • Stroke height: 12 mm
  • Throat: 134 mm
  • Press output: 400 strokes / h
  • Lever to attach the press tools quickly and securely
  • Operated using a foot pedal (supplied)
  • Safety switch for setting the tool

Hand presses

Designed to accommodate Schüco tool inserts.

  • Light, compact, versatile
  • Minimum space required for storing different tools
  • Easy-to-operate using handle
  • Operated using a button to handle
  • Quick change of tools thanks to simple handling
  • No need to remove hand press from compressed air supply when changing tools
  • Security bolts between press and tool
  • Increased user protection

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

Punches

Transom punch

For punching 4.2 x 7 mm slots in the transom profiles for the façade systems.
The transom punch can be used for a variety of façade systems.

  • operated using a foot pedal
  • Installation on machine base, Art No. 299 504 possible
  • Moving punch
  • Integral pneumatic cylinder
  • No height restriction for transom preparation
  • Punches transoms even with pre-mounted isolators
  • Can punch before or after the transform has been notched
  • Can be used for all series, e.g.: FW 50+, FW 60+

Hand punch

Used in special cases, for punching Schüco profiles.

  • Easy-to-operate using handle
  • Operated using a button on the handle
  • Plastic handle

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.