Schüco Façade FWS 50 SG

  • Harmonious all-glass façade look without visible mechanical fixings and with flush-fitted glazing with slimline joints
  • As Schüco FWS 50 SG double glazing and Schüco FWS 50 SG.SI triple glazing with thermal insulation to passive house level: Uf values as low as 0.88 W/(m²K)
  • C2C-certified system with European Technical Approval (ETA 05/0114) for straightforward planning with maximum system reliability
  • Based on the tried-and-tested Schüco FWS 50/FWS 60 mullion/transom façade system: high level of design flexibility with the system
  • Design options of the butt joints as wet sealing and optionally as dry sealing with U-shaped or flush-fitted joint seal
  • Optionally as semi-structural glazing version with horizontal or vertical emphasis through use of cover caps
  • The Schüco AWS 114 SG.SI insert unit blends in homogeneously with the all-glass façade appearance
  • The outward-opening projected top-hung or parallel-opening windows can be operated manually or by means of Schüco TipTronic SimplySmart
  • With a maximum vent weight of up to 250 kg, large-format opening units can also be used
  1. Insulating glass with stainless steel spacer and silicone sealing compound for a load-bearing SG edge seal
  2. Plastic pocket profile for incremental mechanical fixing of the insulating glass unit
  3. Glazing clip for concealed mechanical fixing in the plastic pocket profile
  4. Pre-filler for easy application of the wet sealing
  5. Butt joint as wet sealing
  6. Special glazing rebate gasket