Milling, Drilling, Punching

End milling machines

AKF 4

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

Milling area (Depth x Heigth) 80 x 140 mm.

Technical Data:

Motor:	400 V / 2 kW
Material support shoulder:	+20° / 90° /-20°
Module position:	90°
Milling Ø (max.):	250 mm
Milling packages height (max.):	90 mm
Milling depth:	80 mm
Profile width (max.):	350 mm
Profile height (max.):	140 mm
Profile length (min.):	400 mm
Extraction branch Ø:	yes
Weight:	95 kg

AKF 6

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

Milling area (Depth x Heigth) 85 x 150 mm.

Technical Data:

Motor:	400 V / 3 kW
Material support shoulder:	+20° / 90° /-20°
Module position:	90°
Milling Ø (max.):	250 mm
Milling packages height (max.):	90 mm
Milling depth:	85 mm
Profile width (max.):	305 mm
Profile height (max.):	150 mm
Profile length (min.):	400 mm
Extraction branch Ø:	80 mm
Weight:	190 kg

AKF 8

For accurate milling of the ends of sash bar, transom, mullion and sill rail profiles for T-joints, and of door profiles for the base point.

Milling area (Depth x Heigth) 100 x 180 mm.

Technical Data:

Motor:	400 V / 2,2 kW
Material support shoulder:	90° to 20° (left) / 30° (right)
Module position:	90 and in 15- increments
Milling Ø (max.):	250 mm
Milling packages height (max.):	160 mm
Milling depth:	95 mm
Profile width (max.):	300 mm (at 90°)
Profile height (max.):	180 mm
Profile length (min.):	300 mm
Extraction branch Ø:	80 / 90 / 100 mm
Weight:	400 kg

Copy routers

Copy Router KF 348 and KF 347

For precise machining of the recesses for locks, including cylinder locks, and handles with gearboxes on door and window profiles.

KF 348: Aluminium and steel processing
KF 347: Aluminium processing

Technical Data:

Motor:	400 V / 1,5 kW (KF 348 change-pole motor)
Profile rotation:	180°
Working position:	0°, 60°, 90°, 180°
Profile width (max.):	120 mm
Profile height (max.):	100 mm
Profile length (min.):	500 mm
Profile length (max.):	3000 mm
Weight:	300 kg

Presses

Hydraulic Press

Designed for the Schüco compact tools and the new generation of press tools. The hydraulic press works more quickly and with greater power than the base press.

Lifting height: 20mm
Minimum space required
compact design operated by foot pedal
fixing options
unrestricted tool height
Adapter for the next generation of press tools
Integrated machine base

Basepress

Designed for the new compact tool and the new generation of press tools

Lifting height: 20 mm
Fixing options for length stops and brackets
rapid tool change using fast fit systems (tool is ready to use immediately once fitted onto the base press)
Compact tool are held on the base press using a friction bearing and alignment pins
Unrestricted tool height
Safety switch for tool assembly
Adapter for the next generation of press tools
Increased user protection
Installation on machine base, Art.-Nr. 299 504 possible

Hydropneumatic Hand Press

Designed to accommodate Schüco tool insert.

Minimum construction means it is a very economical system
handle to operate with punch
Rapid tool changing
Security pins between press and tool
improved work protection

Hand Press

Designed to accommodate Schüco tool inserts.

Light, compact, versatile
Minimum space required for storing different tools
Easy-to-operate using handle
Operated using a button to handle
Quick change of tools thanks to simple handling
No need to remove hand press from compressed air supply when changing tools
Security bolts between press and tool
Increased user protection

Compact tools

Can be used for different series

excellent cost-performance ratio
logical sequence of steps in one punching operation
several preparation steps integrated into one combination press
Easy handling using handles
Multi-functionality means no need to change tools constantly
can be used for all series

Punches

Hand Punch

Used in special cases, for punching Schüco profiles.

Easy-to-operate using handle
Operated using a button on the handle
Plastic handle

Transform Punch

For punching 4.2 x 7 mm slots in the transom profiles for the façade systems.
The transom punch can be used for a variety of façade systems.

operated using a foot pedal
Installation on machine base, Art No. 299 504 possible
Moving punch
Integral pneumatic cylinder
No height restriction for transom preparation
Punches transoms even with pre-mounted isolators
Can punch before or after the transform has been notched
Can be used for all series, e.g.: FW 50⁺, FW 60⁺

Hint

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

From this section

Metal machinery

Prefabrication Saws Assembly Shop floor equipment