SchücoSol HP low temperature collector
The combination of Schüco HPSol ground heat pump and solar installation provides the ideal framework for maximum utilisation of solar yields. The solar yields generated can be used directly in almost every operating mode of the heat pump. During the solar ground regeneration in summer, the ground is regenerated by solar yields to the same temperature level as that before the heating period. For this, the cold brine (6 ºC to 12 ºC) is heated directly in the solar collectors. The resulting condensation means that conventional collectors are not suitable here. The specially developed SchücoSol HP low temperature collector has humidity-resistant insulation and drains the condensation. Even with operation at low temperatures, the annual collector yield is increased from 350 kWh/m2 to up to 700 kWh/m2.
Features of the SchücoSol HP low temperature collector:
- Doubling of specific collector yield with low temperature operation
- Defined drainage of condensation
- Non-humidity-sensitive insulation
- Minimum hydraulic resistance due to parallel switching on the meander
- Structural glazing for uninterrupted views in all operating conditions
