Mounting systems for industrial and commercial roofs
The Schüco flat-roof systems are suitable for every type of module – from frameless thin-film laminates to standard modules and Premium large modules. They make optimum use of space and are quick and economical to install, with minimum roof loads. Further benefits include maximum reliability and durability.
Schüco MSE 100 flat-roof mounting system with east/west
The Schüco MSE 100 east/west flat-roof mounting system is the ideal solution for a variety of types of flat roof – without ballast load and with only four different installation components. The new east and west alignment of the Schüco thin-film modules at an angle of just 10º allows for use of up to 90% of the net roof area. With the innovative east/west mounting system, two modules on opposite sides provide a roof-like structural unit with brackets pushed into the rear struts. Fixed to loose floor plates and secured with traction cables, the rows of modules are ballast-free and structurally secure.
Schüco MSE 100 for frameless thin-film modules
The MSE 100 flat-roof mounting system for Schüco AL modules from 80 Wp to 100 Wp can be adapted to the load-bearing capacity of the roof in three stages. By coupling the rows of modules one below the other with connecting profiles and additional securing against slippage, the ballast load can be minimised down to a roof load of just 6 kg/m 2.
Schüco PV Light II flat roof
Mounting PV modules in an elevated position on flat roofs is a fast and economical installation method for large PV installations. The modules are mounted on robust flat-roof brackets to a structural unit with OneTurn connections without mounting rails. The flat-roof brackets can be fixed to the building structure or can be anchored using weights (commercially available edging stones).
Schüco MSE 210 flat roof
The MSE 210 flat-roof mounting system for framed Schüco modules permits the modules to be mounted in various weight classes. Low roof loads are possible for every type of roof.