Ground-mounted installations
Ground-mounted installations from Schüco. They have impressive energy outputs. The framed and unframed modules both provide a high structural load-bearing capacity, and can be installed quickly and flexibly thanks to Schüco system technology.
PV Light ground-mounted frame
The PV Light ground-mounted frame allows flexible mounting of large PV installations regardless of mounting surface characteristics. The module plates can be established either on a foundation or also temporarily anchored, e.g using fixing lugs. By aligning the module plates flexibly, the height can be adjusted by up to 0.5 m. The angle of incline can vary between 0° and 40°.
MSE 210 support post and MSE 100 ground-mounted installation
The support post installation of the MSE 210 mounting system provides economical, fast installation (which can be easily dismantled again) of large ground-mounted systems with all currently available crystalline modules. The MSE 100 provides installation of large ground-mounted systems with Schüco thin-film modules in the AL series. Both systems are based on the one-part support posts that can be mounted quickly and accurately in the ground. The pre-dimensioned table units for approx. 10 or 12 modules can be mounted at angles of 10°, 20°, 30° or 40°.
SunChaser 2 and 6
Schüco SunChaser are tracking systems which constantly keep the mounted PV modules in optimum alignment with the sun. Depending on the design, the solar output can increase by up to 30% compared with a fixed system. Schüco supplies SunChaser in two sizes: SunChaser 2 for up to 60 m2 and SunChaser 6 for a module area up to 247 m2.
Download brochure
