Schüco Premium V
Flat Plate Solar Collector
Schüco Premium V Collector
The Schüco Premium V highperformance solar collector converts solar energy into heat and is excellent for providing domestic hot water as well as for heating swimming pools. The highly selective absorber coating and optimum thermal insulation maximize efficiency. The absorbed solar heat is transferred to a storage tank by freeze-protected, non-toxic solar fluid through a serpentine copper pipe.
Features
- High efficiency with high selectivity absorber coating
- Low energy loss due to excellent thermal insulation
- Robust silver anodized aluminum frame for maximum durability
- Corrosion-resistant materials for high reliability and long service life
- High transparency, low-iron glazing
- Superior flow control over conventional header/riser designs
- Suitable for pitched roof, flat roof, Synergy roof®, awning, and façade installation
- Tempered glass inset a full half-inch into the frame
- Quick and simple installation with SolarEZ mounting hardware, collector connectors, and installation accessories
- Serpentine piping, 1 connection on each long side for portrait orientation of collector
- Certifications: SRCC OG-100, CE, DIN EN 12975-2, DIN CERTCO, EC guideline 97/23/EC
Download Data Sheet:
Schüco Premium V Collector (pdf, 264 KB)
| Solar Thermal Collectors | |
| Product name | Premium V |
| Schüco article number | 231 156 (Silver Frame) 231 399 (Bronze Frame) |
| Size | 84.7 × 49.3 × 3.6 in. (2152 × 1252 × 93 mm) |
| Collector surface area (Ag) | 29 sq ft (2.69 m²) |
| Weight (empty) | 121 lbs (55 kg) |
| Efficiency | ηo = 78.4 % |
| Heat loss coeffi cient (k1 + k2) | k1 = 4.28 W / m² K; k2 = 0.014 W / m² K² |
| Incident angle modifier | k (50) = 0.96 |
| Thermal output | 2.0 kWth |
| Piping configuration | Serpentine |
| Absorber long-wave emissivity | ε = 5.0 % |
| Absorber short-wave absorptivity | α = 95 % |
| Net aperture area | 27.1 sq ft (2.52 m²) |
| Absorber surface area | 27.0 sq ft (2.52 m²) |
| Absorber material | Copper |
| Absorber coating | Highly selective |
| Heat transfer fluid volume | 0.53 gal |
| Minimum volume flow for max. collector connection | 0.66 gal / min |
| Maximum number of collectors parallel / in series | 4 |
| Pressure drop (at respective volume flow) | 4.16 ft H2O |
| Connection | 12.0 mm Cu pipe |
| Connector type | Compression fitting |
| Operating pressure | 46.4 psi (3.2 bar) |
| Maximum operating pressure | 145 psi (10 bar) |
| Test pressure | 290 psi (20 bar) |
| Stagnation temperature | 381° F (194° C) |
| Maximum operating temperature | 248° F (120° C) |
| Solar glazing | Low-iron, high transparency |
| Transmittance | >91.0 % |
| Thickness | 0.16 in (4 mm) |
| Frame material | Aluminum |
| Gasket | EPDM |
| Themal insulation | 0.79 in (20 mm) mineral wool |
| Schüco installation system | Premium Racking System |
Performance Characteristics
Pressure Drop Characteristics